What Is a Dry Van? Dimensions, Freight and Driver Guide

What is a dry van — a red semi truck pulling a white dry van trailer on a highway

A dry van is an enclosed, non-temperature-controlled semi-trailer that shippers, carriers and freight brokers use to transport boxed and palletized general freight while protecting it from weather, theft and road debris. It’s the standard equipment for US truckload freight transport. Most units measure 53 ft (16.15 m) long and 102 in (2.59 m) wide, and each shipment rides behind a semi-tractor with a licensed commercial driver at the wheel, moving freight from shipper to receiver across the supply chain.

Key Takeaways

  • A dry van is an enclosed, non-temperature-controlled trailer that transports packaged, palletized, non-perishable general freight for shippers and freight carriers.
  • The standard US dry van measures 53 ft (16.15 m) long and 102 in (2.59 m) wide and holds 26 standard pallets loaded straight and single-stacked.
  • Federal rules cap gross vehicle weight at 80,000 lb (36,287 kg) on the Interstate System, so a 53 ft dry van typically carries 42,000 to 45,000 lb (19,051 to 20,412 kg) of cargo.
  • A reefer adds insulation and a refrigeration unit, so a dry van is the right choice whenever a freight shipment needs no temperature control.
  • Driving a tractor-trailer dry van requires a Class A commercial driver’s license (CDL) and compliance with Federal Motor Carrier Safety Administration (FMCSA) hours-of-service rules.

What Is a Dry Van in Trucking?

In trucking and freight transport, a dry van is a fully enclosed box trailer with no refrigeration or heating that a semi-tractor pulls to move dry, packaged, non-perishable cargo, such as boxed consumer goods, paper products and canned food, from a shipper’s loading dock to a receiver’s loading dock.

“Dry” means no temperature control. It has nothing to do with moisture in the cargo. The label simply signals that the freight can ride safely at whatever the outside air temperature happens to be on that trip.

The box shields cargo from rain, snow, sun and road spray. Theft is harder too. Solid walls and sealed rear doors mean nobody can see the load, let alone reach it, without first breaking the seal on the back of the trailer.

Dry vans handle both full truckload (FTL) and less-than-truckload (LTL) freight, which keeps them busy across very different kinds of shipments and makes them the most common equipment type in US freight logistics. Load boards such as DAT tag them “V” for van, and freight brokers post more dry van loads than any other equipment type.

Dry Van Truck vs Dry Van Trailer

A dry van trailer is the enclosed box that holds the freight, and a dry van truck is the full rig that transports it: a semi-tractor coupled to the trailer through a fifth wheel and kingpin.

The terms get mixed up constantly. Someone asking what is a dry van truck usually means the complete tractor-trailer dry van combination seen on the highway.

A search for what is a dry van trailer points only to the unpowered box. It has no engine. Freight carriers drop these trailers at shipper docks for loading and return to collect them once the freight is aboard and the doors are sealed, then haul the shipment to the receiver or distribution center.

How a Dry Van Trailer Is Built

A dry van trailer combines a flat floor, solid walls, a sealed roof and rear doors on a steel frame with two rear axles, all designed to keep freight secure from pickup to delivery. Each part comes in several versions, and each choice affects how much freight a carrier can haul and how fast a shipment loads.

ComponentCommon OptionsPurpose
WallsComposite plate or sheet-and-post aluminumProtect cargo and maximize interior width
FloorLaminated hardwood or compositeSupports forklifts and pallet jacks
Rear DoorsSwing doors or roll-up doorFull-height access or tight-dock opening
RoofAluminum or translucent fiberglassTranslucent panels let daylight inside
AxlesSliding tandem axlesShift weight and meet state length rules
Cargo ControlLogistic posts, E-track, load barsStop freight from shifting in transit

Swing doors clear the full rear opening. Roll-up doors fit tight docks where swing doors can’t open, though they cost usable door height because the door panels roll up and store against the ceiling.

Freight carriers and fleets source their dry van equipment from major US manufacturers such as Wabash, Great Dane, Utility Trailer, Hyundai Translead and Stoughton Trailers. Spec sheets differ by brand, so shippers should confirm the carrier’s equipment before tendering tall or heavy freight.

What Are Standard Dry Van Dimensions?

For freight planning, a standard US dry van trailer measures 53 ft (16.15 m) long and 102 in (2.59 m) wide on the outside, with an exterior height of about 13 ft 6 in (4.11 m), while 48 ft (14.63 m) and 28 ft (8.53 m) trailers serve older fleets, doubles and city work.

Dry van dimensions follow federal freight transportation size rules. Title 23 of the Code of Federal Regulations (CFR) Part 658 caps width at 102 in (2.59 m) for trucks running on the National Network.

That regulation also stops states from limiting semitrailers on the National Network to anything shorter than 48 ft (14.63 m). Most states allow 53 ft trailers there.

Height is different. No federal limit exists, so each state sets its own, and the figure is most often 13 ft 6 in (4.11 m) or 14 ft (4.27 m).

TrailerLength (ft / m)Width (in / m)Typical Use
28 ft Pup28 ft / 8.53 m102 in / 2.59 mDouble trailers for LTL linehaul
48 ft Van48 ft / 14.63 m96 or 102 in / 2.44 or 2.59 mOlder fleets and some regional routes
53 ft Van53 ft / 16.15 m102 in / 2.59 mStandard FTL and long-haul freight

53-Foot Dry Van Interior Measurements

For loading freight, a 53 ft dry van offers about 52 ft 6 in (16.0 m) of interior length, roughly 98 to 101 in (2.49 to 2.57 m) of interior width and roughly 108 to 110 in (2.74 to 2.79 m) of interior height. Builders differ. Exact figures vary by manufacturer and wall construction, so two 53 ft trailers from different builders rarely match inch for inch.

MeasurementImperial ValueMetric Value
Interior LengthAbout 52 ft 6 inAbout 16.0 m
Interior Width98 to 101 in2.49 to 2.57 m
Interior Height108 to 110 in2.74 to 2.79 m
Cubic Capacity3,800 to 4,000 cu ft108 to 113 m³

The cubic capacity figures are calculated by multiplying the typical interior measurements in this table, so treat them as estimates rather than guarantees when planning a freight shipment. Tall freight needs a spec check with the carrier. A roll-up door reduces the opening height at the rear.

How Many Pallets Fit in a Dry Van?

A 53 ft dry van shipment holds 26 standard 48 in by 40 in (1.22 m by 1.02 m) pallets loaded straight and single-stacked, and up to 30 pallets when the pallets are turned sideways. Stackable freight doubles those counts.

The math is simple. Divide about 630 in (16.0 m) of interior length by a 48 in pallet and you get 13 rows, with two pallets side by side for 26 total. Turn each pallet so its 40 in side faces forward, and the trailer fits 15 rows, or 30 pallets.

Loading PatternPallet CountNotes
Straight, Single-Stacked26Most common pattern
Turned, Single-Stacked30Needs careful forklift work
Straight, Double-Stacked52Only for stackable, lighter freight
Turned, Double-Stacked60Rare; watch the weight limit

Shorter trailers work the same way. Take the interior length from the 48 ft or 28 ft spec sheet and divide it by whichever pallet side faces forward.

How Much Weight Can a Dry Van Carry?

A loaded tractor and dry van combination can weigh no more than 80,000 lb (36,287 kg) gross on the Interstate System under 23 CFR Part 658, which leaves a typical 53 ft dry van with a legal cargo payload of roughly 42,000 to 45,000 lb (19,051 to 20,412 kg).

To find the real freight payload, start at 80,000 lb and subtract the weight of the tractor, the empty trailer, the fuel and the driver. Lighter equipment helps. A lighter tractor or a composite-floor trailer frees up extra pounds for freight, which raises the revenue a carrier earns per load.

Don’t guess. Shippers and carriers should weigh every heavy freight load on a certified truck scale, such as a CAT Scale, before the truck reaches the first state weigh station on its route.

Freight often “cubes out” or “weighs out” first. Paper towels are the familiar light example, filling the trailer’s space while staying well below the weight limit. Bottled water does the opposite. It’s dense enough to hit the weight limit long before it covers the floor.

The Federal Bridge Formula and Axle Limits

The Federal Bridge Formula limits how much freight weight any group of axles can carry based on how many axles there are and how far apart they sit. It shields bridges from concentrated loads and shapes how shippers build heavy freight shipments.

The formula reads W = 500 [(LN / (N – 1)) + 12N + 36]. W stands for the maximum weight in pounds on the axle group. L measures the distance in feet between the outer axles, and N simply counts how many axles that group contains.

Axle GroupLimit (lb)Limit (kg)
Single Axle20,0009,072
Tandem Axle34,00015,422
Gross Vehicle Weight80,00036,287

A five-axle tractor-trailer commonly reaches 80,000 lb with about 12,000 lb (5,443 kg) on the steer axle and 34,000 lb (15,422 kg) on each tandem. The numbers add up neatly.

Sliding tandem axles shift freight weight between the drive axles and the trailer axles. States add their own freight transportation rules. California, for example, caps the kingpin-to-rear-axle distance at 40 ft (12.19 m) for 53 ft trailers, and many other states set caps of their own.

What Goes in a Dry Van?

A dry van carries packaged, palletized and boxed freight that tolerates outside temperatures, including consumer packaged goods, shelf-stable food, retail and e-commerce merchandise, paper products, auto parts, packaged building materials and furniture, as long as the load fits through the rear doors and stays within legal weight limits.

Freight CategoryExamplesDry Van Fit
Consumer Packaged GoodsPaper towels, detergent, snacksExcellent
Shelf-Stable FoodCanned goods, dry pasta, bottled waterExcellent; water weighs out fast
Retail and E-CommerceApparel, electronics, toysExcellent
Packaged Building MaterialsBagged cement, boxed flooring, shinglesGood; watch weight
Auto PartsBoxed parts, tiresGood
Furniture and AppliancesMattresses, washers, sofasGood; cubes out before weight

Food freight falls under the Food and Drug Administration (FDA) Sanitary Transportation rule, so carriers must supply clean trailers that protect food shipments from contamination. Dirty equipment fails that test.

Freight That Does Not Belong in a Dry Van

Some freight needs a different trailer and a different freight transport mode. Temperature needs and sheer size rule out plenty of loads, and some cargo fails simply because it can’t go in through the rear doors.

Perishable food, frozen goods and many pharmaceuticals need a refrigerated trailer.

Oversize machinery, steel beams and long lumber need a flatbed, step deck or lowboy.

Freight that loads by crane from the side or top cannot enter through rear doors.

Liquid bulk needs a tanker, and loose grain needs a hopper trailer.

Livestock needs a ventilated livestock trailer.

Hazardous materials are a separate freight case. They can ride in a dry van with proper placards and shipping papers, but the driver also needs a hazardous materials (H) endorsement on the license.

Dry Van vs Reefer, Flatbed and Box Truck

Choose a dry van for packaged freight that needs weather protection but no temperature control, a reefer for perishable or temperature-sensitive cargo, a flatbed for oversized loads that need crane or side loading, and a box truck for small local deliveries that cannot fill a full semi-trailer.

EquipmentBest ForTemp ControlLoading MethodCDL Required
Dry VanPackaged, palletized general freightNoneRear dock, forkliftClass A
ReeferProduce, meat, frozen foodHeating and cooling unitRear dock, forkliftClass A
FlatbedSteel, lumber, machineryNoneSide, top or craneClass A
Box TruckLocal deliveries, small loadsUsually noneRear door or liftgateOnly above 26,000 lb rating

Dry Van vs Reefer

The verdict: pick a dry van when freight can ride at outside temperature, and pick a reefer when it cannot. A reefer is a refrigerated trailer with insulated walls and a diesel-powered unit that cools or heats the load.

FeatureDry VanReefer
Temperature ControlNoneRefrigeration unit cools or heats
InsulationNoneInsulated walls, roof and floor
Interior WidthWiderSlightly narrower from insulation
Equipment CostLowerHigher
Driver TasksLoad checks and sealsPre-cooling and temperature monitoring
Freight OptionsDry freight onlyCold or dry freight

Reefer freight usually pays freight carriers higher rates, since the equipment costs more and the refrigeration unit burns its own fuel. How much more? No verified rate gap is available here, so check DAT for current dry van vs reefer rates.

Dry Van vs Flatbed

The verdict: a dry van wins for freight that fits through rear doors and needs protection, while a flatbed wins for loads that are too tall, too long or too heavy to load from the back. A flatbed has no walls or roof.

On a flatbed, the driver secures the freight shipment with chains and straps, then covers it with tarps, all under FMCSA cargo securement rules. Dry vans need less. Their walls hold freight in place, and load bars on E-track handle the rest.

Is a Dry Van the Same as a Box Truck?

No, a dry van is not the same as a box truck, because a dry van is a detachable freight semi-trailer pulled by a separate tractor, while a box truck mounts its cargo box permanently on the same chassis as the cab. Box trucks, also called straight trucks, typically run 10 to 26 ft (3.05 to 7.92 m) long.

Many box trucks carry a gross vehicle weight rating (GVWR) of 26,000 lb (11,793 kg) or less, which means drivers can run them without a CDL. Their niche is local freight. They suit local deliveries and liftgate drops, along with small freight shipments that would waste space in a 53 ft trailer.

Which Trailer Do I Need for My Freight?

Match the trailer to the freight’s temperature needs, size, weight and loading method: a dry van fits most palletized, non-perishable loads, while perishables need a reefer, oversize or crane-loaded freight needs a flatbed or lowboy, and small local shipments are cheaper in a box truck or LTL service.

Freight TypeBest TrailerDry Van Fit Reason
Pallets of Bottled WaterDry vanFits; watch the weight limit
Fresh ProduceReeferNo temperature control in a dry van
Ice CreamReeferNeeds frozen temperatures
Steel BeamsFlatbedToo long; needs crane loading
ExcavatorLowboy or step deckToo tall and too heavy
Four Pallets for Local StoresBox truck or LTLA full trailer wastes capacity
Bulk GrainHopper trailerLoose bulk needs top loading

Dry Van Shipping for Shippers

Shippers book dry van capacity by choosing full truckload (FTL) or less-than-truckload (LTL) service and tendering the load to a carrier or freight broker at a spot rate for one-time moves or a contract rate for recurring lanes, with price driven by distance, lane demand, fuel and accessorial charges.

A spot rate is a one-time freight price for a single load at current freight market conditions. Contract rates differ. Shipper and carrier negotiate one freight rate for repeat loads on the same lane, and that price holds over a set period.

Full Truckload vs Less-Than-Truckload

The verdict: choose FTL when freight fills most of a dry van or needs fast, direct transit, and choose LTL when a shipment covers only a few pallets. LTL carriers consolidate freight from several shippers in one trailer and route it through their terminal network.

FactorFTLLTL
Trailer UseOne shipper fills the trailerSeveral shippers share the trailer
HandlingLoaded once, no terminal transfersMoves through terminals
Transit SpeedDirect and fasterSlower due to terminal stops
Pricing BasisPer mile or flat per loadFreight class, weight and distance
Damage RiskLowerHigher from extra handling

LTL pricing uses the National Motor Freight Classification (NMFC) class system, which rates freight by density, handling, stowability and liability. Get the class right.

What Changes Dry Van Shipping Rates?

No verified figure for current dry van freight rates per mile is available here, because freight rates change weekly; DAT Freight & Analytics publishes current spot and contract trends. Several factors move the price of every freight load.

FactorEffect on Rate
Lane BalanceOutbound-heavy markets cost more; return trips lack freight
Deadhead MilesEmpty miles to reach the pickup raise the price
SeasonFourth-quarter retail peak tightens capacity
Fuel PricesFuel surcharges rise with diesel prices
Lead TimeSame-day tenders pay spot premiums
AccessorialsDetention, lumper and layover fees add cost
Loading MethodDrop and hook saves driver time versus live loading
Dry van trailer at a loading dock

How to Prepare a Dry Van Shipment

  1. Measure and weigh every pallet, and record the total weight and pallet count.
  2. Choose FTL or LTL service based on how much of the trailer the freight fills.
  3. Request quotes from carriers or brokers, and compare spot and contract options.
  4. Confirm dock hours, appointment times and whether the facility offers drop and hook.
  5. Stretch-wrap pallets tightly, and label each pallet with the shipper and receiver.
  6. Load heavy pallets on the floor and spread weight evenly from nose to tail.
  7. Secure the load with load bars or straps on E-track to stop shifting.
  8. Seal the doors, record the seal number on the bill of lading and share it with the receiver.

What Is a Dry Van Driver?

A dry van driver is a Class A commercial driver who transports an enclosed, non-refrigerated trailer of general freight between shippers, receivers, distribution centers and terminals, handling pre-trip inspections, trailer swaps, paperwork and safe over-the-road (OTR), regional or local driving under federal hours-of-service rules.

Dry van truck driver in the cab of a semi truck

Many freight loads are drop and hook. The driver leaves one trailer at a facility and hooks to a preloaded one, then gets back on the road without waiting at the dock. Live loads work differently, since the driver waits while the shipper loads or the receiver unloads the trailer.

Dry van drivers usually stay out of the trailer during loading, which keeps the physical work light compared with jobs where drivers handle freight. Some loads are “no-touch.” Others require the driver to count pallets or check seals.

Route TypeTypical Home TimeDescription
OTRMeasured in weeksLong trips across many states
RegionalOften weeklyRuns within a group of nearby states
LocalDailyShort runs around one metro area

Do You Need a CDL to Drive a Dry Van?

Yes, driving a dry van tractor-trailer requires a Class A commercial driver’s license (CDL), because the combination exceeds a 26,001 lb (11,794 kg) gross combination weight rating with a towed unit heavier than 10,000 lb (4,536 kg), the federal threshold under 49 CFR 383.91.

Interstate CDL holders must be at least 21 years old, and that federal minimum applies no matter which state issued the license. Intrastate rules differ. Most states allow intrastate driving at 18.

Follow these steps to earn a Class A CDL for dry van freight work.

  1. Pass a Department of Transportation (DOT) physical and get a medical examiner’s certificate.
  2. Pass the state knowledge tests and obtain a commercial learner’s permit (CLP).
  3. Complete Entry-Level Driver Training (ELDT) with a provider listed on the FMCSA Training Provider Registry.
  4. Pass the state skills test, which covers a pre-trip inspection, basic control and an on-road drive.
  5. Apply to freight carriers that hire new drivers for dry van freight.

Training isn’t optional anymore. ELDT has been mandatory for new Class A applicants since February 7, 2022, so first-time applicants must finish it before they take the skills test.

Hours of Service Rules for Dry Van Drivers

Federal hours-of-service rules limit how long dry van drivers can haul freight and work before they must stop to rest. The clock is electronic. Most drivers record their hours on an electronic logging device (ELD).

RuleLimit
Driving Limit11 hours after 10 consecutive hours off duty
Duty WindowNo driving after the 14th hour on duty
Rest Break30 minutes after 8 cumulative hours of driving
Weekly Limit60 hours in 7 days or 70 hours in 8 days
Restart34 consecutive hours off resets the weekly limit

How Much Do Dry Van Drivers Make?

No verified figure for dry van driver pay is available here, because the Bureau of Labor Statistics (BLS) reports wages for all heavy and tractor-trailer truck drivers rather than by trailer type. For live numbers, check the current BLS Occupational Outlook Handbook alongside carrier job postings.

Pay MethodHow It Works
Cents per MilePaid per dispatched or practical route mile
Percentage of LoadShare of linehaul revenue, common for owner-operators
HourlyCommon in local and dedicated jobs
Weekly GuaranteeFixed minimum regardless of miles driven
Accessorial PayExtra pay for detention, layovers and stops

Reefer and flatbed jobs add tasks such as temperature monitoring and load securement, and some carriers pay premiums for that work. Extra tasks, extra pay.

Pros and Cons of Dry Van Trailers

Dry vans offer shippers and carriers weather protection, cargo security, steady freight volume and simpler driver work, while their limits include rear-only loading, no temperature control, an interior height of about 9 ft (2.74 m) and rates that typically trail specialized trailers such as reefers and flatbeds.

FactorDry Van StrengthDry Van Limit
Cargo ProtectionSealed from weather and theftContents cannot be inspected in transit
Freight VolumeMost general freight fitsPerishables and oversize freight excluded
LoadingFast dock and forklift loadingNo side or crane loading
Driver WorkloadNo tarping or temperature checksLong dock waits on live loads
Equipment CostLower purchase and upkeep costLower rates than specialized trailers

Frequently Asked Questions

Yes. A reefer can carry dry, non-perishable freight with its refrigeration unit off, which helps reefer carriers fill return freight trips that would otherwise run empty. A reefer’s insulated walls leave slightly less interior width than a dry van.

Yes. Dry vans regularly haul shelf-stable food, from canned goods and cereal to bottled drinks. Clean equipment is required, because the FDA Sanitary Transportation rule says trailers must protect food from contamination during transit.

Yes. Dry van work suits new Class A drivers because it skips reefer temperature management and flatbed chaining and tarping. Skipping those tasks frees rookies to focus on backing and trip planning, plus hours-of-service compliance.

Drop and hook means a driver unhooks one trailer at a shipper’s facility and hooks to another that’s already loaded with freight. The payoff is time. Drivers skip the hours they’d otherwise spend waiting at the dock.

Deadhead miles are miles a truck drives with an empty trailer, such as the trip from a delivery to the next pickup. No freight means no revenue. Freight carriers and brokers plan routes to keep those empty miles as low as possible.

Conclusion

Anyone asking what is dry van freight now has a clear answer: enclosed, non-temperature-controlled cargo that moves in a 53 ft (16.15 m) trailer within an 80,000 lb (36,287 kg) federal gross limit. The rest is detail.

Shippers should keep using dry vans for packaged, palletized goods and switch to reefers, flatbeds or box trucks only when temperature, size or volume demands it. Budgets need planning too. Track DAT rate trends before contract season starts.

New drivers should expect dry van freight work to stay a common entry point into Class A careers. The equipment will keep changing. Trailer tracking and lighter materials are part of that shift, along with aerodynamic devices, but the basic enclosed box will keep moving most everyday freight across US supply chains.

Esther Howard

Esther Howard leads trucking and commercial driving content at TruckingHow, covering CDL training, trucking regulations, fleet operations, and truck maintenance. With over a decade of experience researching the transportation industry, she brings a practical, research-driven approach to driver education and safety standards. Her guides help drivers, fleet owners, and trucking professionals make informed decisions on and off the road.

Related Posts

  • how-to-get-trucking-authority

    How to Get Trucking Authority from LLC to First Load

  • How much do truck dispatchers make shown by a dispatcher with a headset at a computer

    How Much Do Truck Dispatchers Make? Salary, Per Load, and Weekly Pay

  • Refrigerated trucking companies reefer trucks parked in a row ready for dispatch

    Refrigerated Trucking Companies: How to Compare and Choose Carriers